Connect the phone line to the "line" port
 

Connect the phone to the phone port
 

connect the power adapter to the wall electric outlet
 

plug the jack to the "DC 12V" port
 

Input Data
 

Turn on the unit by pressing the "I" on rear black power switch.
 

Press and hold the large center Button which we will refer to as the "ENTER" button for 3 seconds. Screen will show "ISP PHONE NO".
 

Press the "ENTER" button fast and the cursor will flash which mean it is ready to enter info or edit.
 

Dial the ISP phone No. From the phone set or use the up and down button to enter the digit and the right and left button to move. If you want to erase everything go with the right button to the end and go back with the left button to erase.
 

Once the phone No. Is complete press the "ENTER" button fast to go out of the edit mode and set the no.
 

Press the down button once then the "ISP USER ID" will appear. Press the Enter button fast to go in the Edit mode and edit as before. Once finished press the "ENTER" button fast to set.
 

Press the Down Button then the "ISP PASSWORD" will appear and edit as before.
 

Press the down button time after time till you reach "EXIT SETUP" then press the enter button once and unit is ready now.
 

In case you want enter "00" to dial international then when "ITSP ACCOUNT" appears press the enter button once and then press the down Button time after time till you get "LONG DISTANT CODE" edit as before and enter 00 and set and go by the down button to "EXIT TO MAIN" and press the enter button fast and then the down button until you reach "EXIT SETUP" and exit by pressing the "ENTER" button once fast.
 

Making a call.
 

Turn the unit power on and wait 20 seconds till the display light turn off.
 

Lift the handset till you see the display light and then press the "ENTER" button fast. You will see "~" then it change to "+" then to "#" then to "@". When @ displayed you are connected to Internet.
 

Dial the phone No. Without 00 meaning Country code+city code+phone No. Then # to speed it up. # is only to speed it up but not necessary.
 

To hang up press the "Enter Button" fast or hang up the handset.
 

To dial another unit you dial *unit ID# meaning if the unit ID is 111111 you dial *111111#
 

To check Balance dial *99#
 

If you call a device to device press *xxxxxx# where xxxxxx is the device no.
 

If the device ever freeze Just turn off and again on.